[ Data files ] [ Contact Us ] [ FAQ ] [ Purchase here ]
SusProg3D now supports the Ford Integral Link independent
rear suspension, as used on the 2015 Mustang
The Ford Integral Link consists of the following
components:
The single top link controls the wheel camber.
The bottom control arm controls wheelbase & in conjunction with integral link, caster.·
The toe link controls wheel toe.
The knuckle supports the wheel hub and bearing. There is mounting point for the camber control link, the caster control link, the toe control link, and the lower control arm.
The static camber, caster and toe can be set via the Geometry | Alignment menu
The single top link controls the wheel camber.
The bottom control arm controls wheelbase & in conjunction with integral link, caster.·
The toe link controls wheel toe.
The knuckle supports the wheel hub and bearing. There is mounting point for the camber control link, the caster control link, the toe control link, and the lower control arm.
The static camber, caster and toe can be set via the Geometry | Alignment menu
SusProg3D Join Mailing
List
For Info On Updates Feedback - Information Request.
We DO NOT hire
sell or loan names to organisations Privacy Policy
For Info On Updates Feedback - Information Request.
©
2026 Beven D Young All rights reserved
This page was last modiied:
Beven
Youngs Home Page - Clearance
Lines - Delivery
Information - About
us - SusProg3D
Suspension Software
MOTA
2 Stroke Engine Software - Our
Customers Say - Contact
Us - Car
Shows And Swap Meets
My
Twitter Page - Our
Guarantee
My
Facebook Page
Beven
Youngs Linkedin Page